Telstra Gateway Max 2 Unboxing Features and Instructions

Telstra-Gateway-Max-2

I have just received Telstra’s Gateway Max 2 Unit, and my first impressions are overall good. It is aimed very squarely at beginners/novices, with not much for the pro’s to tweak in the back end. It is ultra light, with a somewhat flimsy feel. It has been rock solid so far, with an uninterupted uptime of four days. The unit does not come with instructions, just a simple but adequate Quick Start Card. The firmware does have some nice features such as Dynamic DNS options, Port Forwarding, Parental Controls etc…But not much for those of us that really like to dig in and do some hardcore configuring.

The unit’s very basic interface is at 10.0.0.138

Gateway Max User Interface

Gateway Max User Interface

Telstra Gateway Max 2 Advanced Options

Telstra Gateway Max 2 Advanced Options

Telstra Gateway Max 2 Box Front

Telstra Gateway Max 2 Box Front

Telstra Gateway Max 2 Box Rear

Telstra Gateway Max 2 Box Rear

Telstra Gateway Max 2 Box Side

Telstra Gateway Max 2 Box Side

Telstra Gateway Max 2 Quick Start Card Front

Telstra Gateway Max 2 Quick Start Card Front

Telstra Gateway Max 2 Quick Start Card Rear

Telstra Gateway Max 2 Quick Start Card Rear

Telstra Gateway Max 2 Unit FrontTelstra Gateway Max 2 Unit Front

Telstra Gateway Max 2 Unit Front

Telstra Gateway Max 2 Unit TopTelstra Gateway Max 2 Unit Top

Telstra Gateway Max 2 Unit Top

Telstra Gateway Max 2 Unit BackTelstra Gateway Max 2 Unit Back

Telstra Gateway Max 2 Unit Back

Fix Connectivity Problems by Power Cycling your Home Network and Computers

Unplugged

Power Cycling sounds like riding a bike really fast up a hill, but in the technology field it refers to a way to get everything back online when things aren’t working right, or you have to recover from a failure or freeze.

A Power Cycle is achieved by turning everything off safely, disconnecting the power sources, and leaving everything to sit for a in-determined amount of time (some say 30 seconds, some say 30 minutes).

I find Power Cycling makes all my devices talk to each other quicker. As I have a somewhat sophisticated home network, yanking the cord on everything from time to time allows new routing tables to be created, and old machines that are no longer connected to the network (That may have been a Master Browser (Machine that tells other machines where everything is located)) to be removed from the environment.

We’ll use my network as an example to go through the procedure, as things do need to be done in a specific order. Using a IP Scanner (There’s lots of free ones available – just Google IP Scanner) I generated this view of my home network.

IP-Scanner

To begin a Power Cycle, I turn all off the Computers and my Server off. Once they are safely and completely shut down I yank the power cords from the sockets (This is important, if it is still plugged in, there is still power going in, keeping things in memory – So YANK IT!). With my Laptops, I take the batteries out. Next, I shut down and unplug my WD TV media machines and the “Elements” hard drives attached to them. My iPhone and iPad are now shut down by Pressing and holding the Sleep/Wake button (Power Button on top right side of device) for a few seconds until the red “slide to power off” slider appears, and then slide the slider. Lastly, My Airport Extreme Router, D-Link Switch, and ADSL Modem are all disconnected from the outlets.

Now I go throw a tennis ball with my Dog Benson for about 10 minutes. This allows plenty of time for any power left in the devices to drain away, and all caches and memory to clear.

Benson

After playtime I get ready to restart everything. First, I plug the modem back in and let it initialize and connect to the internet. Then I turn on my Switch, and my Airport Extreme Router is next. When they are all operational and happy, I turn my computers on one at a time, beginning with the one I use most, first (So it can become the Master Browser). Once it is up and connected to the internet, I turn the next one in my usage order on, and let it connect, then the next, etc, etc. Then, I boot up my WD TV Live Hub and reconnect the “Elements” storage drives, and lastly, I power on my iPhone and iPad by holding down the Sleep/Wake (Power Button on top right side) for a few seconds until I see the silver Apple logo appear.

Everything should be back up, running, and happy!

Some people will tell you there is no advantage to power cycling. I personally, do believe it helps, and if you are undecided, Try it for Yourself and make up your own mind! What have you got to loose?