Best Optimal Settings for Handbrake convert DVD to H265 HEVC Mac Windows Linux 2023

February 6, 2021July 3, 2023 The Webernets31 Comments

Convert DVD to H265 with Handbrake

Convert DVD to H265 HEVC with Handbrake without having to know or understand all of the settings. Just copy my settings and you’re done!

H.264 Vs H.265 – Which one should I use?
If you have a 1080 HD TV and an older media player you will want to use H.264 – See THIS ARTICLE for instructions.
If you have a 4K Television and a newer media player H.265 is best, so use these instructions below.

*Whilst your user interface may appear slightly different than shown here (depending on if you are using Windows, Mac or Linux), the settings and results will be the same across all platforms.

**NOTE** – These settings are for DVD to H265 HEVC Video
Use these settings if you have a recent 4K UHD Television and newer media player like the Apple TV 4K.
To convert DVD to H.264 – CLICK HERE!
To convert 1080P BLURAY to H.264 – CLICK HERE!
To convert 1080P BLURAY to H.265 – CLICK HERE!
To convert 4K BLURAY to H.265 – CLICK HERE!

INSTRUCTIONAL VIDEO COMING SOON!

THE SHORT VERSION

IMPORTANT – Before you begin, drop your source DVD file into Mediainfo and identify if the video stream is 480 or 576 size! (Different countries use different sizes)

1 Open source file in Handbrake and make sure you are on the “Summary” tab
2 Set file format to “MKV’ and deselect “Passthru Common Metadata”
3 Click “Dimensions” tab and set Resolution Limit to 480p or 576p (depending on your source file) and leave Anamorphic as Automatic, leave cropping “Automatic” and borders “None”
4 Click the “Filters” tab
5 Leave Interlace Detection set to Default, De-interlace set to Decomb, and Preset at “Default”
6 Click the “Video” tab
7 Select “H.265 10-Bit (x265)” from the Video Codec drop down
8 Select “Same As Source” in “Framerate”
9 Check the “Constant Framerate” button
10 Set “Encoder Preset” slider to “Slow”
11 Set “Encoder Tune” to “None”
12 Set “Encoder Profile” to “Main 10”
13 Set “Encoder Level” to “4.1”
14 Set the “Constant Quality” slider to “22”
15 In the “Additional Options” box ad strong-intra-smoothing=0:rect=0:aq-mode=1:rd=4:psy-rd=0.75:psy-rdoq=4.0:rdoq-level=1:rskip=2
16 Click the “Audio” tab
17 Select the preferred 5.1 channel soundtrack – If it is AC-3/Dolby Digital 5.1 click pass thru and go to step 20
18 Set “Codec” to “AC3” and the Bitrate to 448kb
19 Set Mixdown to “5.1 Channels” and Samplerate to “48”
20 Click the “Subtitles” tab
21 Click the “X” in the circle at the right side to remove the subtitles track on Windows, or select “None” from dropdown on Mac
22 Click the “Chapters” tab
23 Uncheck the “Create Chapter Markers” option if you don’t want them, or leave it checked if you do
24 Give your output file a unique name and save it somewhere easy to find
25 Make a preset to save the settings and Press the Green “Start Encode” button

THE LONG VERSION

Continue reading “Best Optimal Settings for Handbrake convert DVD to H265 HEVC Mac Windows Linux 2023”

Easiest Best Optimal settings for Handbrake DVD Video Conversion – FEB19

February 10, 2019February 5, 2022 The Webernets29 Comments

THERE IS AN UPDATED VERSION OF THIS ARTICLE FOR FEBRUARY 2022 USING HANDBRAKE VERSION 1.5.1 HERE

This is a simple easy guide on how to make the best encodes with the smallest file size in Handbrake without having to know or understand all of the settings. Just copy my settings and you’re done!

To get started right away please scroll down to the red text that says “START HERE”.

**NOTE** – These settings are for DVD Video ONLY – You can find a updated Blu Ray Tutorial HERE.

MY RANT – By popular demand, I have decided to update my two articles on how to quickly and easily produce great quality DVD and Blu Ray video encodes with Handbrake. The program interface has changed, the H.264 codec has been refined, and the TV’s we view our movies on have evolved dramatically since writing the original articles.

THE GOAL – To produce the highest quality video with the smallest possible file size, whilst retaining the entire original 5.1 Dolby Digital sound track. DVD’s playing on todays large 4K TV’s look terrible due to their low resolution. We will also use Handbrakes filters to clean up the picture quality.

DISCLAIMER – This method will produce very nice quality DVD videos, but may take 2 hours or more to process each hour of video, so my advice is to let run whilst you are sleeping each night. Unfortunately, good quality video with small file size cant be done quickly, it just doesn’t work that way. Also, All set-ups are different. We all have different size TV’s, different size and shape rooms, different players and a plethora of other factors that could produce varying results. This is a guideline, and a great place for a beginner to start. If you feel there is something that could be done better, or should be done differently, please feel free to let us all know by leaving a comment.

THE TECHNICAL STUFF – My TV is a 65″ Samsung 4K which I absolutely love, and sit about 10-12 feet back from. I play the media from a Apple TV 4K, and use the Infuse Pro 5 player app. The video is encoded on a 3-4 year old HP desktop computer with a Intel I5 processor. The version of Handbrake used in this tutorial is v1.2.0 which is the current stable release for February 2019.

Ready to encode? START HERE!

Continue reading “Easiest Best Optimal settings for Handbrake DVD Video Conversion – FEB19”

Quick and Easy Convert DTS 5.1 or AAC 5.1 to Dolby Digital AC3 on Mac with MKV Tools

February 9, 2019February 25, 2023 The Webernets3 Comments

MKV Tools can convert AAC and DTS to Dolby Digital!

A lot of new TV’s these days do not support the DTS Soundtrack found in BluRay and DVD discs. I learned this the hard way when I got my new 65 Inch Samsung 4K TV. A lot of older audio equipment can not play AAC 5.1 either. I have ripped a lot of my Blu Rays to a network drive and it seems a large number of them have DTS. Usually, us Mac users are left out, but in this case we have an awesome tool available to us to fix this easily called MKV Tools. It works very quickly as it allows the video to “Pass Through” without having to be re-encoded. Only the audio is touched. As you can see in the below screen capture of my source file in Media Info below, the video file I am starting with has a DTS sound track.

To convert it to a more compatible AC3 format download and install MKV Tools HERE. Once you have opened MKV Tools you will need to choose “Open” to import your video file, as drag’n’drop is not supported in the unregistered version. At this point you will receive another “Nag” window. Just wait a few seconds and you will be able to select “Register Later”, then you can choose your video file. Once the file is imported you will see the main window.

At this point you need to select the video and audio streams you need to work on, then you can start making adjustments.

Once you have selected the Audio and Video channels, make sure video is set to “Pass Thru”. In the audio options, select AC3 (5.1) and deselect “Pass Thru”. Then set your desired bit rate. I prefer 640kb, but you can go down to 384kb comfortably without any real noticeable quality loss. Then, press the “Convert” but and MKV Tools will start converting your audio stream. A new tab will fold out underneath the main window where you can view the progress.

Whilst MKV Tools is not technically free, it is a bargain at $5.99. You can use it without paying to re-encode as many videos as you like, but given how powerful and convenient it is, and how little it costs, its well worth buying/registering in my opinion. I did!

Easiest Best Optimal settings for Handbrake 1080p Blu Ray Video Conversion on Mac, Windows and Linux – UPDATED – MARCH 2023

January 29, 2019July 3, 2023 The Webernets29 Comments

Convert BluRay to H.264 with Handbrake

Convert BluRay to the smallest file size in Handbrake without having to know or understand all of the settings. Just copy my settings and you’re done!

H.264 Vs H.265 – Which one should I use?
If you have a 4K Television and a newer media player you will want to use H.265 – See THIS ARTICLE for instructions.
If you have a 1080 HD TV and an older media player H.264 is best, so use these instructions below.

*Whilst your user interface may appear slightly different than shown here (depending on if you are using Windows, Mac or Linux), the settings and results will be the same across all platforms.

**NOTE** – These settings are for 1080P BLURAY to H.264 Video ONLY
Use these settings if you have a 1080 HD Television and older media player
To convert 1080P BLURAY to H.265 – CLICK HERE!
To convert DVD to H.265 – CLICK HERE!
To convert DVD to H.264 – CLICK HERE!
To convert 4K BLURAY to H.265 – CLICK HERE!

THE SHORT VERSION

1 Open source file in Handbrake and make sure you are on the “Summary” tab
2 Set file format to “MP4’ and deselect “Passthru Common Metadata”
3 Click “Dimensions” tab and set Resolution Limit to 1080p and leave Anamorphic as Automatic, leave cropping “Automatic” and borders “None”
4 Click the “Filters” tab
5 Leave Interlace Detection set to Default, De-interlace set to Decomb, and Preset at “Default”
6 Click the “Video” tab
7 Select “H.264 (x264)” from the Video Codec drop down
8 Select “Same As Source” in “Framerate”
9 Check the “Constant Framerate” button
10 Set “Encoder Preset” slider to “Very Slow”
11 Set “Encoder Tune” to “Film”
12 Set “Encoder Profile” to “High”
13 Set “Encoder Level” to “4.1” – If this wont play on your system drop it back to “3.1”
14 Set the “Constant Quality” slider to “24”
15 In the “Additional Options” box add ref=5:bframes=5
16 Click the “Audio” tab
17 Select the preferred 7.1 or 5.1 channel soundtrack
18 Set “Codec” to “AC3” and the Bitrate to 448kb
19 Set Mixdown to “5.1 Channels” and Samplerate to “48”
20 Click the “Subtitles” tab
21 Click the “X” in the circle at the right side to remove the subtitles track on Windows, or select “None” from dropdown on Mac
22 Click the “Chapters” tab
23 Uncheck the “Create Chapter Markers” option if you don’t want them or leave it checked if you do
24 Give your output file a unique name and save it somewhere easy to find
25 Make a preset to save the settings and Press the Green “Start Encode” button

THE LONG VERSION

Continue reading “Easiest Best Optimal settings for Handbrake 1080p Blu Ray Video Conversion on Mac, Windows and Linux – UPDATED – MARCH 2023”

Easily Stop Folders Opening Automatically when Hovering Cursor Over Them on Mac

March 8, 2017March 27, 2023 The Webernets6 Comments

Stop Folders Opening Automatically when Hovering Cursor Over Them

I really hate how folders open automatically when you hover your mouse cursor over them on Mac. Sometimes I need to place a number of files into different folders, and having them open automatically when I just want to drop something in there is a real pain. It slows me down, and is just plain annoying. Thankfully, it is easy to stop this behavior. Open Preferences, and look for the accessibility option.

Once you have the accessibility tab open, look for mouse & trackpad options in the left pane, and then click it to open.

Now you will be able to see the source of the problem. Spring loaded folders.

To slow down the time it takes for folders to pop open when you are hovering over them, slide the slider towards “long” delay. To stop folders from springing open automatically completely, uncheck the “spring-loading delay” option.

Problem Solved!

Normalize Audio Volume Levels in Video on Mac with Sound Normalizer

January 5, 2017January 13, 2017 The Webernets1 Comment

Different volume levels in videos can be a real pain. I have a folder with dozens of music videos that I like to watch from time to time, and often one song will be very quiet and I need to raise the volume to hear it, then the next song will blow the speakers apart because it is so loud.

Sound Normailzer fixes all of that by adjusting the volume of each video to be the same – so you can set your volume once then sit back and enjoy your videos.

The program seems to be built on, or at the very least modeled after MP3Gain Express For Mac, so for those of us who have normalized our music collection, the interface and simple usability will be very familiar.

Just drag and drop your video files into Sound Normalizer, and it will start analyzing the volume levels.

Once analysis has finished, you will see the results listed. It shows you the current dB rating of the track, and the amount of gain it needs to apply or subtract to achieve the desired dB level. The desired level is set by default 89dB which is pretty much the standard most people will want. You can adjust this if you want to, but I advise leaving it alone.

If you are happy to proceed and make the changes to your videos, press “Apply Gain” in the bottom right hand corner, and Sound Normalizer will start fixing up your videos.

The good thing is that it doesn’t actually adjust your original video, it adjusts a copy, and saves it to a new location which can be selected in the preferences. The new copy’s file name is appended with the normalization target dB, which in most cases will be 89dB.

Sound Normalizer works with all of the most popular Video AND Audio file types.
Video formats such as MP4, MKV, FLV, AVI, RMVB, WebM, 3GP, TS, M2TS, MTS, MOV, WMV, MPG, DivX, etc.
Audio formats such as MP3, WMA, AAC, AC3, AU, M4A, MMF, OGG, FLAC, WAV, MP2, etc.

Sound Normalizer is not free however, but it is well worth the $7.99 price tag. Grab your copy today in the app store, or find out more on Sound Normalizers Preview Page HERE.

Share this:

Share this:

Share this:

Share this:

Share this:

Share this: