Pop Vinyl Repairs – How To

Pop Vinyl Repairs – How To

How Can I Clean Off Marks?

Magic Erasers seem to be the most popular solution in the Pop community. It is a block of Melamine Foam, and is sold under many different brand names. For Australians, it is a Chux product, available in stores like Coles. Other solutions include a small amount Rubbing Alcohol or Eucalyptus oil on a cotton swab. I have also read some people use acetone on a swab, but this sounds a bit aggressive to me, and will likely remove paint. I STRONGLY recommend you do not use this method. For those who want to give it a go on really stubborn stains, tread carefully and press gently, and don’t say you were not warned!

How Can I Straighten A Bent Dagger/Knife/Sword/Body Part?

There are two widely used methods, both involve heat. For thin parts, a hair dryer can be used to warm and soften the material, then maneuver the part into the correct location and hold it there until it cools. For thicker part, run it under hot water, or submerge it in hot water until it softens. Again, hold it in the right spot until it cools.

How Can I Make The Head Sit Straight?

Bobble Heads – Force a few cotton balls up inside the spring and manipulate it until the head sits correctly.

Non-Bobble Heads – Submerge the head in hot water until the glue softens, then gently manipulate it until it is in the correct spot, and hold it until the glue cools/dries again.

How Can I Repair A Crushed Box?

We all hate it when a Pop arrives crushed, but I have read on some boards that people have attempted to repair damaged boxes with some success. Whilst it is definitely not recommended, it seems crushed boxes can be improved by removing everything from the inside, flattening them out, putting a pillow case over them, and gently passing a warm iron with NO steam over them. Obviously, you would need to concentrate on the cardboard and steer clear of the plastic, but if the box is already trashed, you have got nothing to lose. I personally would opt for a stack of heavy books instead of an iron…

How Can I Secure A Loose Clear Plastic Window?

Use a regular glue gun to add a drop of glue in an out of sight place.

How can I re-attach a part that has broken off?

Know a good glue to use on Funko Pop Vinyls? Let us know about it by leaving a comment below.

Windows 10 Beta Trial “a component of the operating system has expired” error fix

a component of the operating system has expired

I hate Windows……I really really do…….

Long story short, as I am a beta tester for Micro$oft I previously installed a preview version of Windows 10. My life circumstances have changed since, so I haven’t been keeping up with its development, nor have I been updating the brand new HP PC I bought for it.

So today (Some time after the trial version has expired) I turned on the machine……BRICK…….nothing.

Couldn’t boot from disk, couldn’t boot from a USB drive, NOTHING but:

“a component of the operating system has expired”

The bottom line, if you want to reclaim your files and reinstall or upgrade, just boot into BIOS and set the date to JUNE 2015.

How to fix WDTV Pink Screen Issue

WDTV Pink ScreenIf the power goes off, or I need to reboot my WDTV for any reason, when it comes back on my screen is always tainted with a pink hue, it seems to be called the “Pink Screen Issue”. From what I can gather, its caused by a mismatch in frame rate when using HDMI. Here’s how I fix it on my unit. I hope this works for you as well.

Start at the home screen

WDTV Pink Screen IssueScroll through and select the “Setup” option

WDTV Pink Screen Issue SetupThen select Audio/Video OutputWDTV Pink Screen Issue Video OutputThe next step is to select HDMI

WDTV Pink Screen Issue HDMINow select AUTO

WDTV Pink Screen Issue AutoNext, choose OFFWDTV Pink Screen Issue OffPINK BE GONE! Click OK to save the changes

WDTV Pink Screen IssueClose out of setup by pressing the Home button on your remote

WDTV Pink Screen IssueAnd you are now all set to go

IMG_6021

How to fix old bad decals and make them slide off the backing sheet paper

Fix old bad decals and make them slide off the backing sheet paper

IMG_6367In this tutorial I show you how to Fix old bad decals – I show you how I reclaimed some Tamiya decals that even after more than half an hour in water, still refused to slide off the backing sheet. Reclaim decals that are no longer good for use. They have been subject to moisture or humidity previously, and now even after more than half an hour in water, they refuse to slide off the backing sheet.

httpvh://youtu.be/0kqbpiaorw8

Add Media or Add Tag button not working in WordPress Quick Fix

Wordpress Logo

Like many others, recently I have found I am unable to Add Media and Add Tags to my WordPress posts. The first thing I did was disable all of my plugins to make sure there wasn’t a conflict. In my cases there wasn’t, but its well worth trying this first. The next thing I did was switch my theme to the built in 2015 theme, and this fixed the problem. So I went to my normal theme creators web page and found that the theme had an update available, so I have downloaded and installed it this morning and everything is working fine again.

So in short, if you are having the same problem, try switching to another theme!

Easy Fix or Work Around for iMessage bug problem on iPhone running IOS7

iMessage iconSince updating to iOS 7, a lot of iPhone users are finding that iMessage does not send their messages. It looks like it is sending, but stops or freezes at last minute. I have discovered a work around, I am not sure if it is a “Fix” but I have had good results using this method, and have tried on on some friends phones with success as well. I hope it works for you!

httpvh://youtu.be/Y0JZ0R51e9I

Firstly, go into iMessage on your iPhone.

imessage-fix-001Clear off ALL messages and threads by swiping to the left on each conversation to make the “delete” option appear.

imessage-fix-002and then press delete.

imessage-fix-003Now go into settings.

imessage-fix-004Then select “Messages”

imessage-fix-005Turn “iMessage” option OFF

imessage-fix-006Now turn your phone off by pressing and holding the power button on the top right edge, and then swipe across the red “Slide To Power Off” message on your screen.

imessage-fix-007Once your phone has completely powered off, you can press the power button again to restart it. Once your phone has booted up again, select “Settings”

imessage-fix-004Go back into Messages

imessage-fix-005Turn on the “iMessage” option and you will see your phone re-activating and syncing with the iMessage server.

imessage-fix-009When it has finished, it you should see confirmation that you can now use iMessage.

imessage-fix-010Now, Hopefully, you should be back in business.